MKN LONDON 2 electric fryer, Easy Lift 20 kW, 2x 12.5 liters

The Optima 850 series

A robust series of professional kitchen appliances with an 850 mm depth for larger, institutional kitchens. A complete range with over 240 electric and gas appliances that can be flexibly combined into any conceivable configuration, fully tailored to the user's needs. Its robust quality and premium design make the Optima 850 series the centerpiece of any kitchen.

Construction:

• Housing and top made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate at an angle of 45° as a drip edge at the front at the bottom, 50 mm edges on each side folded down 90° and 40 mm upstand 90° at the rear
• 30 mm cover plate overhang, connecting to the device housing
• With tightly welded drainage channels on the sides, 45° slanted design at the front - rounded at the back (R 30)
• Multi Safe Connect – Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect bars (optional accessories) with thermal protection and integrated moisture barrier, facilitating easy movement of cookware at worktop level
• Hygienic cupboard space H2 , closed on three sides – rounded corners and edges (R20)
• Prepared as standard for mounting height-adjustable device or flange feet (optional), 4 castors, 2 rollers (rear) and 2 feet (150 mm, front)
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge.
• The unit is fully wired internally for connection to the customer's electrical supply - all contactors required for operation are installed
• Equipped for media supply through pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout)
• IPX6 – Protection against powerful water jets

Effective area:

• Deep-drawn deep fryer made of chrome-nickel stainless steel, with a 20 mm safety edge to prevent foaming and boiling over of the oil
• Seamless and tightly welded into the cover plate
• Pressed fill marks (min./max.) in the tank to check the oil filling
• Deep cold zone beneath the heating elements to trap suspended particles, with precision-fit oil cleaning tray
• Bottom of the container with slanted outlet and welded drain tap positioned vertically downwards

Operating concept:

• Control panel with profile to protect the controls
• Front control panel removable for easy and cost-efficient service access
• MKN stainless steel premium knob, ergonomically shaped knobs for easy position recognition
• The textured surface of the control panel where the buttons are located prevents liquid from entering
• Operating and design concept OPTIMA Control
• Intuitive, digital-analogue – OPTIMA Control in symbiosis with OPTIMA Pilot – Buttons and electronics intelligently combined
• Display with tempered 6 mm safety glass, large display and ideal positioning for good readability of the screen from all sides
• Precise cooking temperature setting (degree setting adjustable in 1 °C, 5 °C or 10 °C)
• Adjustable fat melting function
• EcoMode – adjustable automatic temperature reduction
• Adjustable temperature ranges (min./max.)
• Residual heat indicator
• Automatic cooking: up to 20 cooking programs can be stored in the appliance

One-handed operation

• Special swivel joint to turn the heating element in and out
• Easy one-handed operation of the heating element
• Safe – prevents the heating element from accidentally falling into hot oil

Easy Lift function

• Automated cooking processes with timer function
• Process reliability with automatic lift system
• Less weight loss of the product
• Extending oil life
• The lifting and lowering of the baskets can also be controlled manually using the OPTIMA Pilot

Heat:

• Heating with tubular heating elements made of chrome-nickel steel Ø 8.5 mm, with a low surface load for gentle heating of the frying oil and a longer life of the heating elements
• Heating element can be fully unscrewed for easy cleaning