MKN electric frying pan 100 mm deep | Stainless steel PowerBlock | 4.4 kW

The Optima 700 series

A heavy-duty series of commercial kitchen appliances with a depth of 700 mm for the catering and hospitality industry. A complete range with over 160 electrical and gas appliances that can be flexibly combined into any conceivable configuration. The special, level-matching coupling strips and drainage channels on both sides of the appliances meet stringent ergonomic and hygiene requirements. The heavy-duty quality and premium design make the Optima 700 series the centerpiece of any kitchen.

Construction:

• Housing and cover made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit size 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate sloped at a 45° angle, designed as a drip edge at the front of the base, 50 mm edges bent at a 90° angle on each side and a 40 mm raised edge at a 90° angle at the rear
  30 mm lid projection, closed against the appliance housing
• With tightly welded drainage channels on the sides, 45° slanted design at the front – rounded at the rear (R 30)
• Multi Safe Connect – Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect bars (optional accessories) with thermal protection and integrated moisture barrier, making it easier to move cookware at worktop level
• Cupboard space according to MKN hygiene standard , closed on three sides – rounded edge between back wall and bottom (R18)
• Prepared as standard for installation of height-adjustable device feet or flange feet (optional), 4 castors, 2 rollers (rear) and 2 feet (150 mm, front)
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on a mounting bridge
• The appliance is fully wired internally for connection to the customer supplied electricity supply with appliance switch in the control panel – all necessary contactors for operation are installed
• Equipped with media supply via pre-drilled half-breakout openings (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (breakout opening)
• IPX6 – Protection against strong jets of water

On-site installation requirements

• Electrical connection

Effective area:

• 100mm deep baking tray with a baking surface with large, rounded corners that are easy to clean.
• Seamless and grease-resistant, recessed and welded into the cover plate.
• Lockable grease drain at the front.
• Appliance with one or two separate, electronically adjustable heating zones.
• Finely polished baking surface with PowerBlock sandwich plate base.
• The PowerBlock sandwich panel consists of extremely corrosion-resistant 3 mm thick chrome-nickel steel (1.4404) and a 12 mm thick, heat-resistant underlayer of steel (1.5415) for heat storage.

Operating concept

• Control panel with profile to protect the controls
• The control panel can be detached from the front for easy and cost-efficient access for maintenance
• MKN black plastic rotary knobs , ergonomically shaped knobs for easy position recognition
• The relief on the control panel where the buttons are mounted prevents the ingress of liquids
• Temperature control by means of precision thermostats with indicator light.

Heat

• Surface heating system directly under the ground, flush-mounted
• 8mm aluminium plate for even heat distribution, with precision milled grooves to support the tubular heating elements made of chrome nickel steel for optimal and fast heat transfer
• Individually screwed tubular heating elements allow for easy maintenance