MKN gas tilting frying pan with base 21.5 kW, 8GPKS32XMRM

The Optima 850 series

A robust series of professional kitchen appliances with an 850 mm depth for larger, institutional kitchens. A complete range with over 240 electric and gas appliances that can be flexibly combined into any conceivable configuration, fully tailored to the user's needs. Its robust quality and premium design make the Optima 850 series the centerpiece of any kitchen.

Construction:

• Housing and cover made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate sloping downwards (45°) at the front at the bottom, 50 mm edges on each side folded down 90° and 40 mm raised edge at the rear 90°
• 30 mm lid overhang closed relative to the appliance
• With tightly welded drainage channels on the sides, 45° sloping design at the front - rounded at the rear (R 30)
• Multi Safe Connect - Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect brackets (optional accessories) with thermal protection and integrated moisture barrier, facilitating easy movement of cookware at worktop level
• Unit is fully wired internally for connection to customer supplied electrical supply - all contactors required for operation are installed
• The appliance is fully piped internally to the gas requirements for the customer supplied gas connection
• Fully internally piped to meet water requirements for connection to the customer supplied water supply
• Equipped with media supply via pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout)
• Standard prepared for installation of height-adjustable devices or flange feet (optional)
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge
• IPX5 – Protection against splashing water

On-site installation requirements

• Electrical connection
• Gas connection
• Connection to the water supply network
• 3/4 inch cold water connections
• Connection to wastewater

Effective area:

• Hygienically designed pan made of chrome-nickel steel 1.4404 (AISI 316), suitable for GN containers, corner radii up to 52.5 mm, with welded baking tray base made of chrome-nickel steel (1.4404).
• Perfect positioning of the pan minimizes movement of the pour stream and spillage, allowing the pan to be completely emptied.
• Tilting by means of an electrically powered tilt mechanism with manual switch.

Operating concept

• Control panel with profile to protect the controls
• Front control panel removable for easy and cost-efficient service access
• MKN stainless steel premium knob , ergonomically shaped knobs for easy position recognition
• Relief on the control panel where the buttons are mounted prevents liquid ingress
• Variable temperature control

Lid

• Easy Handling System – the lid's rotating hinge moves easily and precisely, the lid opens and closes continuously without interruption
• Double-walled, thermally insulated lid, wear-resistant, without seal, with continuous stainless steel round tube bail handle

Heat

• Heating by means of atmospheric rod burners; automatic switch-off during tilting operation
• Electronic ignition and flame monitoring of the burner
• Thermostatic temperature control with electronic flame monitoring