MKN electric bain-marie 1/1 GN, 1.5 kW, 8EBAM111D

The Optima 850 series

A robust series of professional kitchen appliances with an 850 mm depth for larger, institutional kitchens. A complete range with over 240 electric and gas appliances that can be flexibly combined into any conceivable configuration, fully tailored to the user's needs. Its robust quality and premium design make the Optima 850 series the centerpiece of any kitchen.

Construction:

• Housing and top made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, rear wall and bottom
• Cover plate at an angle of 45° as a drip edge at the front at the bottom, 50 mm edges on each side folded down 90° and 40 mm upstand 90° at the rear
• 30 mm overhang of the top surface, connecting to the device housing
• With tightly welded drainage channels on the sides, 45° slanted design at the front - rounded at the back (R 30)
• Multi Safe Connect – Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect bars (optional accessories) with thermal protection and integrated moisture barrier, facilitating easy movement of cookware at worktop level
• Hygienic cupboard space H2 , closed on three sides – rounded corners and edges (R20)
• Prepared as standard for mounting height-adjustable device or flange feet (optional), 4 castors, 2 rollers (rear) and 2 feet (150 mm, front)
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge.
• The unit is fully wired internally for connection to the customer's electrical supply - all contactors required for operation are installed
• Fully equipped with pipes according to water requirements, for connections to the mains network supplied by the customer
• Equipped for media supply through pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout)
• IPX6 – Protection against powerful water jets

On-site installation requirements

• Electrical connection
• Connection to the water supply (water pressure 2-6 bar, max. water flow: approx. 20 l/min)
• 3/4" cold or hot water connections (for optional water filling system)
• Connection to water drain

Effective area:

• Deep-drawn sink made entirely of chrome-nickel steel (1.4301) (AISI 304) with large radii for easy cleaning
• Seamless and grease-free welded into the cover plate
• Sink suitable for placing two GN 1/1 containers, 200 mm deep
• Bottom of the sink with drain to the lower part, drain tap DN 20 mounted vertically downwards

Operating concept

• Control panel with profile to protect the controls
• Front control panel removable for easy and cost-efficient service access
• MKN stainless steel premium knob, ergonomically shaped knobs for easy position recognition
• Embossed surface of the control panel where the buttons are mounted prevents liquid ingress
• Operating and design concept OPTIMA Control
• Intuitive, digital-analogue – OPTIMA Control in symbiosis with OPTIMA Pilot – Buttons and electronics intelligently combined
• Display with hardened 6 mm safety glass, large display and ideal positioning for good readability from all sides
• Precise cooking temperature setting (degree setting adjustable in 1 °C, 5 °C or 10 °C)
• Adjustable temperature ranges (min.)

Heat

• Indirect heating with tubular heating elements, thermostatic temperature control