MKN electric cooking unit | 4 plates | 10.4 kW

The Optima 700 series

A heavy-duty series of commercial kitchen appliances with a depth of 700 mm for the catering and hospitality industry. A complete range with over 160 electrical and gas appliances that can be flexibly combined into any conceivable configuration. The special, level-matching coupling strips and drainage channels on both sides of the appliances meet stringent ergonomic and hygiene requirements. The heavy-duty quality and premium design make the Optima 700 series the centerpiece of any kitchen.

Construction:

• Housing and cover made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate, sloping at 45° as a drip edge at the front of the bottom, 50 mm edges on each side folded 90° and 40 mm raised edge 90° at the rear
• 30 mm lid overhang closed to the appliance
• With tightly welded drainage channels on the sides, 45° sloping design at the front - rounded at the rear (R 30)
• Multi Safe Connect - Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect brackets (optional accessories) with thermal protection and integrated moisture barrier, facilitating easy movement of cookware at worktop level
• Cupboard space in MKN hygienic standard , closed on three sides - rounded edge between back wall and base (R18)
• Prepared as standard for installation of height-adjustable devices or flange feet (optional), 4 castors, 2 rollers (at the rear) and 2 feet (150 mm, at the front).
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge.
• The unit is fully wired internally for connection to the customer supplied electrical supply – all contactors necessary for operation are installed.
• Equipped with media supply via pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout).
• IPX5 – Protection against water jets

On-site installation requirements

• Electrical connection

Effective area:

• The hob is seamlessly and tightly welded into the cover plate
• Rectangular hobs 220 x 220 mm, made of grey cast iron, are sealed against the hob
• Hobs with protective covers – when no energy is being used, the energy supply is reduced by approx. 50%
• Short distance of less than 35 mm between the cooking plates makes it easier to move heavy cookware

Operating concept

• Control panel with profile to protect the controls
• Front control panel removable for easy and cost-efficient service access
• MKN black plastic knob , ergonomically shaped knobs for easy position recognition
• Relief on the control panel where the buttons are mounted prevents liquid ingress
• Adjustable heat output using a 7-position switch - fine adjustment of the heat output of each cooking zone

Heat

• Heating with fixed hotplates
• Overheating protection by automatic switch-back