MKN electric hob | chrome-plated | 2 zones | 6 kW

The Optima 700 series

A heavy-duty series of commercial kitchen appliances with a depth of 700 mm for the catering and hospitality industry. A complete range with over 160 electrical and gas appliances that can be flexibly combined into any conceivable configuration. The special, level-matching coupling strips and drainage channels on both sides of the appliances meet stringent ergonomic and hygiene requirements. The heavy-duty quality and premium design make the Optima 700 series the centerpiece of any kitchen.

Construction:

• Housing and cover made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate, sloping at 45° as a drip edge at the front of the bottom, 50 mm edges on each side folded 90° and 40 mm raised edge 90° at the rear
• 30 mm lid overhang closed to the appliance
• With tightly welded drainage channels on the sides, 45° sloping design at the front - rounded at the rear (R 30)
• Multi Safe Connect - Easy to install system for sealing and connecting adjacent appliances using Multi Safe Connect brackets (optional accessories) with thermal protection
  and integrated moisture barrier, facilitates easy movement of cookware at countertop level
• Cupboard space in MKN hygienic standard , closed on three sides - rounded edge between back wall and base (R18)
• Prepared as standard for mounting height-adjustable device or flange feet (optional), 4 castors, 2 rollers (rear) and 2 feet (150 mm, front).
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge.
• The unit is fully wired internally for connection to the customer supplied electricity supply with an appliance switch in the control panel – all contactors necessary for operation are installed.
• Equipped with media supply via pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout).
• IPX5 – Protection against water jets

On-site installation requirements

• Electrical connection

Effective area:

• Multi-zone hob, chrome-plated with anti-reflective coating (up to 18 mm thick)
• With labyrinth seal and all-round drainage channel at the same height as the cover plate
• Divided into cooking zones of equal size – rounded corners (R 59) for easier cleaning
• Separate thermostatically controlled cooking zones – for cooking, simmering and keeping warm
• Even heavy cookware can be easily moved across the entire surface
• Pans of different shapes and sizes are no longer a problem

Operating concept

• Control panel with profile to protect the controls
• Front control panel removable for easy and cost-efficient service access
• MKN black plastic knob , ergonomically shaped knobs for easy position recognition
• Relief on the control panel where the buttons are mounted prevents liquid ingress
• Adjustable heat output through 10 finely adjusted power levels per cooking zone

Heat

• Hob heated by special contact heating elements made of high-quality chrome-nickel steel
• Fast and even energy distribution thanks to adapted geometry
• Variable temperature control for each cooking zone