MKN 4-burner electric stove with oven, 4x 3.25 kW + 5.4 kW FlexPower

The Optima 850 series

A robust series of professional kitchen appliances with an 850 mm depth for larger, institutional kitchens. A complete range with over 240 electric and gas appliances that can be flexibly combined into any conceivable configuration, fully tailored to the user's needs. Its robust quality and premium design make the Optima 850 series the centerpiece of any kitchen.

Construction:

• Housing and top made entirely of chrome-nickel steel (material no. 1.4301) / AISI 304
• Visible surfaces with polished and satin finishes, grit 320
• Buckle-resistant, self-supporting, closed construction with side walls, back wall and bottom
• Cover plate at an angle of 45° as a drip edge at the front at the bottom, 50 mm edges on each side folded down 90° and 40 mm upstand 90° at the rear
• 30 mm lid projection closed to the device frame
• With tightly welded drainage channels on the sides, 45° slanted design at the front - rounded at the back (R 30)
• Multi Safe Connect – Easy-to-install system for sealing and connecting adjacent appliances using Multi Safe Connect bars (optional accessories) with thermal protection and integrated moisture barrier, facilitating easy movement of cookware at worktop level
• Hygienic cupboard space H2 , closed on three sides – rounded corners and edges (R20)
• Prepared as standard for mounting height-adjustable device or flange feet (optional), 4 castors, 2 rollers (rear) and 2 feet (150 mm, front)
• In addition, the device can optionally be prepared for height-adjustable plinth feet or for mounting on an installation bridge.
• The unit is fully wired internally for connection to the customer's electrical supply – all contactors required for operation are installed
• Equipped for media supply through pre-lasered half-cutouts (rear wall bottom left/right, subfloor rear left/right) incl. membrane seal for media supply (depending on the amount of media), matching the size of the opening (cutout)
• IPX5 – Protection against water jets

Effective area:

• The hob is seamlessly and tightly welded into the cover plate
• Rectangular hobs 300 x 300 mm, made of grey cast iron, are sealed with the hob
• Hobs with protection – when no energy is being used, the energy supply is reduced by approx. 50%
• The short distance of less than 35 mm between the cooking plates makes moving heavy cookware easier
  
  
• Integrated with electric baking and roasting oven GN 2/1 in base cabinet
• Heating by stainless steel tubular heating elements, temperature adjustable from 50 – 300 °C.
• Top heat via internal heating element, bottom heat via indirect heating
• Infinitely variable temperature control with thermostat (separate for top and bottom heat)
• Equipped with indicator light and selector switch for: top heat only, bottom heat only and combined top and bottom heat.
• The oven has a double-walled, robust oven door (loadable up to 100 kg) with a torsion spring hinge
• The oven door is smooth on the inside and outside and equipped with a steam extraction system.
• Side handle prevents contact with rising heat when opening the door.
• The oven interior has spacious, easy-to-clean internal radii (hygienic design)
• On the sides there are two baking tray guides with three insertion levels for GN 2/1,
  equipped with tilt protection and removable for easy cleaning.

Operating concept:

• Control panel with profile to protect control elements
• The control panel can be detached from the front for easy and cost-efficient service access
• MKN stainless steel premium knob , ergonomically shaped knobs for easy position recognition
• The textured surface of the control panel where the buttons are mounted prevents liquid from entering
• Adjustable heat output using a 7-position switch – fine-tuning of the heat output of each cooking zone

Heat:

• Heating with fixed hotplates
• Overheating protection by automatic switch-back